Setting Dimensions: Single Engagement (2 pc.) Design

Coupling Size	D2	D3	S2	S3	OAL
A	2.130	4.500	0.687	1.625	3.4375
B	2.870	5.250	0.687	1.625	3.4375
C	3.595	6.000	1.000	1.937	4.0625
D	4.345	6.750	1.250	2.187	4.5625
E	5.095	7.500	1.750	2.687	5.5625
F	6.595	9.000	1.750	2.937	6.0625
G	8.000	11.000	1.750	2.937	6.0625
H	9.000	12.000	3.000	4.250	8.6875

Note: This coupling design can accommodate only Angular Misalignment.
It is therefore normally used at each end of a floating shaft,
or with a “C” flange motor with a pilot (rabbet) fit.